|
|
 |
|
No items in cart
|
|
|
|
|
|
|
WHAT IS X10?
X10 is a communications "language" that allows compatible products to talk to each other using the existing electrical wiring in the home. Most X10 compatible products are very affordable and the fact that they talk over existing wires in your home means that no costly rewiring is necessary. Installation is simple, a transmitter plugs (or wires) in at one location in the home and sends its control signal (on, off, dim, bright, etc.) to a receiver which plugs (or wires) into another location in the home.
X10 is Simple
Press a Button on the Transmitter and the Signal is Sent over the Home's Wiring to a Receiver
Using simple dials or buttons you assign each product with one of up to 256 addresses. If you wish two products to go on and off together you can set them to the same address or use scene addresses on many advanced products. All X10 compatible products can be freely mixed and matched - so use Smarthome products together with X10, Leviton, Stanley, IBM, JDS, ACT, Homepro, etc.
|
 | | 5 Easy Steps to Install Plug-In X10 Products | |
| | X10 - Making it Trouble-Free | | Most of the time, X10 products work without any problems. However, because X10 products talk over your home's electrical wires they may have difficulties in two situations. The first is when there is an appliance running that generates "noise" onto the powerline. Appliances that may cause problems are motors (e.g. dryer, treadmill, vacuum cleaner, etc.) and advanced electronics (e.g. switching power supplies on some laptops, some big screen TV's, etc.). The good news is that all you need to do is plug the appliance into a noise filter such as FilterLinc.
The second "issue" with X10 is when your X10 transmitter is on one "side" (phase) of your home's electrical wiring and the receiver is on the other "side". Many times the signal either bridges the two phases at the transformer at the street or via some 220V appliance in the home. When this doesn't happen, a simple plug-in phase coupler called SignaLinc will solve this challenge.
| 
FilterLinc
Noise Filter
 SignaLinc
Phase Coupler |
| | X10 -- Advantages | | It is estimated that X10 compatible products can be found in over 10 million American homes. This is because it has so many advantages over other types of remote control products and systems:
- Inexpensive
- No new wiring is required -- perfect for retrofit
- Simple to install
- 100's of compatible products
- Control up to 256 lights and appliances
- Time proven -- it has been around for over 30 years
|
| | INSTEON — Ultimate Reliability | |
INSTEON is a robust, redundant dual-band mesh network that combines wireless radio frequency (RF) with the home's existing electrical wiring. INSTEON is less susceptible than other single-band networks to the kind of interference and noise commonly encountered within the home. INSTEON confirms every message to ensure that messages are received error-free, and it automatically retransmits corrupted messages. Because every INSTEON device acts as a two-way repeater, the INSTEON Network becomes stronger and more reliable as it grows. INSTEON-enabled devices will work with legacy X10 products.
| | Example Products by Type | |
| |
View Cart 
