|
|
| Hidden Link Tabletop IR Receiver |
|
|
| Item# 8110 |
|
|
|
|
|
|
Overview
|
- Attractive case for shelf-top locations.
- Red talkback LED tests system for correct wiring as well as indicating infrared reception.
- Attached 7' cable and 3.5 mm mini plug permits direct plug-in to connecting blocks
Essential Info
Use this shelf-top IR receiver when you can't drill into a cabinet or piece of equipment and use the smaller hidden sensors. This sensor is about an inch high and about 3.25" wide and includes a 'talkback' LED so you'll know the command was received and sent to the emitter. NOTE: The status LED on your IR repeater should only be lit when it is receiving an IR signal from your remote control. If you notice that the LED is always on, you may be getting interference from your television or the ambient light in the room. This will cause the system to overheat and will burn out prematurely. There are LCD and Plasma safe kits which filter out the interference coming from your television.
Manuals/Software
What's Included
291-10 tabletop IR sensor
|
More Info
|
For basic applications, this tabletop IR Sensor picks up IR signals up to 90 degrees off-axis and from up to 30 feet away. Equipped with a 7-foot cable and 3.5 mm stereo mini plug, which is plugged directly into the "IR RCVR" jack on the included one-emitter connecting block or any connecting block we carry. IR modulation frequency bandwidth: 30 - 100 kHz. Requires a power supply, sold separately.
Extend the reach of your sensor with a 50 foot male to female cable (8186). This three-conductor cable has 1/8" male and female plugs molded onto a high quality cable.
|
Specifications
|
Specifications |
| Manufacturer: | Xantech |
| Manufacturer Product No.: | 291-10 |
| Pick-up Range: | 30 ft. | | Pick-up Angle: | 90 degrees | | IR Bandwidth: | 30-100kHz | | Dimensions: |
3 1/4"w x 1"h x 2"d |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
|