|
Handheld Long Range Transmitters
|
|
|
|
|
| 1-Ch Handheld Long-Range Transmitter |
| Item# 7426DX |
|
|
|
|
|
Overview
|
- Up to Two Miles of Line-of-Sight Range
- 2 & 4 Channel models Configurable as 2-Button Panic Transmitters
- 4 Channel Configurable as 4-Channel Continuous Output Transmitter (for Driving Left-Right-Up-Down Devices)
- includes Belt Clip and six inch "rubber duck" antenna
- Powered by Two 9V Batteries (Supplied)
Essential Info
These Long-Range handheld transmitters can be used for a variety of wireless remote control applications. When activated, the transmitter will send a 2-watt 27 MHz digital encoded FSK modulated signal to a Long-Range receiver. The receiver will verify the signal and activate its corresponding relay. Battery supervision is included in all units. If the voltage falls below 12 volts during transmission, a battery low LED will illuminate on the receiver.
|
Specifications
|
| Current Draw | 250mA (Transmitting) | | Operating Temperature: | -4° to +140° F (-20° to +60° C) | | Operating Frequency: | 27.244 MHz | | Bandwidth: | Bandwidth: X | | Number of Codes: | 65,536 | | Code Setting Method: | DIP switch programming | | Power: | Two 9V alkaline batteries (supplied) | | Weight: | 1 lb. (0.454 Kg) | | Dimensions: | 2.375 in L x 1.375 in W x 12.25 in H | | RF Output Power: | 2 Watts (typical) | | Transmit Time: | Up to 30 seconds | | Code Transmission: | Alarm and low battery | | Antenna Impedance: | 50 Ohms (antenna supplied) | | Accessory: | Belt clip (supplied) |
|
Reviews
|
|
|
|
|
|