|
|
| 1-Channel Long-Range Transmitter |
|
|
| Item# 7426AX |
|
|
|
|
|
Overview
|
- Up to 10 miles of line-of-sight range
- Weather-resistant case
- Accepts N/O or N/C inputs
- Fully supervised (loop status, low battery, link integrity)
Essential Info
You don't need to be on the premises in order to monitor the status of the sensors around your home. When triggered by any external switch, the 1-Channel Long-Range Transmitter will send a 10-watt, 27.255 MHz, digital-encoded, FSK-modulated signal to a companion receiver (sold separately), which will verify the digital code, activate its output, and trigger the remote device. A 1-channel, 4-channel, or 16-channel long-range receiver is required and sold separately. You'll also need a 3-foot whip antenna (sold separately).
Manuals/Software
What's Included
Transmitter
Instructions
|
More Info
|
Fully Supervised TransmissionThe transmitter has full supervision capabilities. If the "status" option is selected, the transmitter sends hourly status signals to its receiver. If these signals cease, the receiver will indicate trouble by activating its status output after four hours. Contact supervision allows the receiver's outputs to follow the transmitter's inputs, staying activated as long as each transmitter input is activated. Alternately, an "auto-restore" option can be selected, causing a momentary receiver output each time any transmitter input is activated. Each input can be configured for either N/O or N/C contacts (switch selectable). Two 8-position switches set the unit's system code. This code must be matched in the companion receiver. There are 65,536 different system codes possible.
Multiple Power OptionsPower for the transmitter can come from an external regulated 12 VDC power supply or from a 12-volt battery. If the power supply voltage drops below 10.5 volts, a low battery message will be included with any signal transmitted, causing the receiver's low battery output to activate.
MaterialsThe transmitter is housed in a rugged weather-resistant metal enclosure with a sturdy SO-239 antenna connector and a water-tight wiring strain relief bushing. During transmissions, the red operation indicator (visible through a window on the case) lights. If the input voltage is low, the indicator will blink during transmissions.
|
Specifications
|
Specifications | | Linear Corporation Product No.: | SST00083 or MR161T-XT-1 | | UPC: | 093863103964 | | Dimensions: | 4.25" L x 2.5" W x 6.25" H | | Weight: | 1.5 lbs. (0.68kg) | | Operating Temperature: | -4° to 140° F (-20° to 60° C) | | Operating Frequency: | 27.244 MHz | | Bandwidth: | 6 KHz | | Number of Codes: | 65,536 | | Code Setting Method: | DIP switch programming | | Operating Voltage: | 12 to 15.0 VDC | | Operating Current: | Standby: 15 µA; Transmitting: -2.0 Amps at 12 VDC | | Housing: | Black, weather-resistant, anodized aluminum enclosure with removable end caps to provide wiring and programming access; end caps | | RF Output Power: | 12 Watts typical | | Loop Response Time: | 500 msec | | Code Transmissions: | Alarm, restore, status, and low battery | | Status Report Time Frame: | 70 minutes | | Transmit Time: | 1 second | | Antenna Impedance: | 50 Ohms | | Warranty: | 1 year, limited |
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|