|
|
| 2 Color Bullet Camera Kit |
|
1 customer rating:
|
|
|
| Item# 29097 |
|
|
|
|
|
Overview
|
- Low, 0.1-lux minimum illumination for viewing in almost total darkness
- Cameras receive power and deliver video over a single cat. 5 cable
- Color bullet cameras are safe for indoor or outdoor installation
- View camera images on your television
Essential Info
Take full advantage of a Greyfox structured wiring system by installing security cameras that connect via inexpensive cat. 5 wiring and can be viewed over your home's television sets. The 2 Color Bullet Camera Kit contains everything you'll need to get started on a cat. 5 camera system, including two color cameras and a cat. 5 camera module, which resides in your structured wiring enclosure (sold separately) to send images through connected televisions.
Manuals/Software
What's Included
2 color bullet cameras
2 camera mounting plates
Cat. 5 camera module
Single channel modulator
RCA to RCA patch cord
12V DC 1.5A power supply
Instructions
|
More Info
|
The included indoor/outdoor color cameras connect via a single twisted pair cable to receive power and deliver video and audio (with the optional Cat. 5 Camera Microphone, sold separately). You'll be able to access the camera's color images from any room in the house with a cat. 5-connected video amplifier (sold separately) through the channel you specify using the included modulator. Each camera features a Sony 1/4" Super-HAD CCD sensor in a white bullet case and includes a removable tilt-and-swivel base for easy aiming.
An auto-electronic shutter, auto-white balance and auto-gain control provide improved picture quality. In spite of their slender bodies, the cameras have a 92-degree viewing angle, so you'll be able to see everything in their range. Viewing isn't limited to the bright daytime hours: The Indoor/Outdoor Cat. 5 Color Bullet Camera offers 0.5-lux illumination, for seeing in low light.
The included 1-Channel Frequency Agile Mono Modulator allows you to view images from your security cameras through your connected televisions or through an LCD Display Module (sold separately). Select a single channel from UHF channels 14 to 69 or cable channels 60 to 94 or 100 to 125. This modulator is digital PLL tuned, which limits channel drift, and it retains full channel memory in the event of a power outage.
The Cat. 5 Camera Module that sits in the structured wiring enclosure can support up to four cat. 5 Greyfox cameras. Two are included in this kit; additional Cat. 5 Color Bullet Cameras are sold separately. The module sends the 12-volt DC power across the cat. 5 cable to the cameras and receives the video and audio over this single cable, as well. Its additional features include LEDs that indicate the sequence rate of the connected cameras. Additional Cat. 5 Camera Modules are also availble separately.
A 3-Channel Frequency Agile Mono Modulator is also available and sold separately for viewing camera images on up to three different user-specified channels. Prefer using black and white cameras? A 2 Black & White Bullet Camera Kit is also available.
|
Specifications
|
Specifications | | Manufacturer: | Greyfox | | Manufacturer Product No.: | F7644 | | UPC: | 871744103339 | | Warranty: | 1 year, limited |
Cameras | | Dimensions: | Camera: 3 3/8" x 15/16" diameter (including housing); wall plate: 2 7/8" x 4 5/8" | | Viewing Angle: | 92 degrees | | Image Pick-up Device: | SONY 1/4" Super HAD CCD sensor | | Effective Picture Elements: | EIA: 510*492 | | Horizontal Resolution: | 330 TV lines | | Minimum Illumination: | 0.5 Lux @ F2.0 | | S/N Ratio: | More than 48dB | | Auto Electronic Shutter: | EIA: 1/60s~1/100,000s | | Auto Gain Control: | Yes | | Gamma Characteristic: | 0.45 | | Lens Furnished: | Board lens f 3.6mm/F2.0 | | Synchronous System: | Internal, negative sync | | Video Output: | 1 Vp-p/75 Ohms, RJ45 connector | | Power Requirements: | 12V DC +/- 10% | | Power Consumption: | 120 mA | | Operating Temperature: | 14° F to 122° F |
Modulator | | Dimensions: | 3 5/8" W x 1 5/8"H x 4 3/4" D | | Weight: | .5 lb. | | UHF Channels: | 14 to 69 | | Cable Channels: | 60 to 94 and 100 to 125 | | Power Requirements: | 110 V | | Input Signal: | NTSC video, 1 V P-P, negative sync -40 IRE and 100 IRE video information | | Input Impedance: | 10 K ohms minimum from 1 KHz to 10 KHz | | Frequency Response: | +/-3 dB maximum from .1 KHz to 10 KHz with 1 KHz as a reference | | RF Output: | +15 dBMV at channel 14 UHF and 60 cable | | Audio Output: | Mono |
Camera Module | | Dimensions: | 4.25" x 2.38" x 1.1" | | Video Output: | RCA, 75 Ohm baseband | | Audio Output: | RJ45, 100 Ohm baseband | | Forward Gain/Loss: | Unity gain - baseband | | Power Supply: | 12V DC +/- 10% | | Power Consumption: | 7.2W/600mA (4 cameras); 1.32W/110mA (0 cameras) | | Operating Temperature: | 32° F to 160° F |
|
Images/Video
|
|
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|