|
|
|
| SwitchLinc Dimmer - INSTEON Remote Control Dimmer, White |
|
|
| Item# 2476D |
|
|
|
|
|
Overview
|
- Save money on bills by dimming your lights with this easy-to-install dimmer
- Create elegant whole-house lighting scenes in minutes
- Control lights remotely from anywhere in the house
- A great low-cost investment for any home
- Award-winning INSTEON technology provides superior performance and reliability
Essential Info
"Excellent design, great functionality, works smoothly. Very well built, easy to program. This is the way products should be!"William - Fort Lauderdale, FL INSTEON SwitchLinc Dimmer - The Best-Selling Remote-Controllable DimmerFill your entire home with personalized mood lighting for any occasion. This dimmer can do it all: you can dim or brighten it manually by holding the paddle directly or you can add it to a whole home scene where all your lights turn off with the press of a single button. The INSTEON SwitchLinc Dimmer has 32 brightness levels, which makes setting your lights to the perfect intensity very easy. This dimmer switch can control incandescent loads; if you need to control a fluorescent light fixture, or a non-dimmable appliance, try the INSTEON SwitchLinc Relay (Non-Dimming). How many times have you jumped into bed and forgotten to turn the lights off? With the SwitchLinc Dimmer's remote control ability, you can have the convenience of adding a bedside controller to turn off your lights after you get into bed. The SwitchLinc Dimmer can control up to a 600-watt load. If a larger load is required, the SwitchLinc Dimmer (High Wattage) is available. New! Etched Labeling Now Available (click here to see all etching options) Note: As with all wall dimmers, the SwitchLinc may feel warm during operation. Rigorously tested and approved to UL-standards, the amount of heat generated falls well within approved limits and poses no threat to your home or the lifespan of the device. Neutral wiring is required. Do I have neutrals? Interactive Lessons:Setting the On-Level (flash)
Setting the Ramp Rate(flash)
View our Videos:
Linking SwitchLinc to LampLinc
Setting the On-Level
Setting the Ramp Rate
Unlinking from a SwitchLinc Dimmer
Changing Out the Decora Style Paddle
Changing Out the LED Light Strip
Installing a SwitchLinc
3-Way Dimmer Installation & Setup
Smarthome Home Tour
Would you like to try INSTEON before you buy? Check out our Flash Demo to take a test drive!
Manuals/Software
What's Included
INSTEON SwitchLinc V2 Dimmer
Quick Start Guide
2 mounting screws
5 wire nuts
White paddle included
|
More Info
|
Easy To Install
The INSTEON SwitchLinc Dimmer is so easy to install and set up, and yet so affordable, you'll want to replace all your switches with SwitchLinc Dimmers. Just remove the old switch, reattach the line, load, and ground wires with the addition of the neutral wire using the included wire nuts, and you're done. If this is your first INSTEON installation, the best way to purchase a SwitchLinc Dimmer is to buy the complete INSTEON Keypad Dimmer Scene Lighting Starter Kit. It includes everything required to set up your INSTEON network, including two SwitchLinc Dimmers, a pair of INSTEON Access Points to ensure INSTEON network reliability, and the KeypadLinc Dimmer. Learn more about INSTEON here.
Custom-Etched Paddle Available
For the ultimate in personalization, the SwitchLinc Dimmer is available with a custom-etched paddle. Ideal for labeling switches in a multi-gang setup, custom etching allows you to identify at a glance which switch controls which load.
Slim Design
Similar dimmers are up to 50 percent deeper than the SwitchLinc Dimmer. Thanks to its slim design, it makes installation easy even in small junction boxes. If you'd rather have your SwitchLinc installed by a professional, click here to find a local INSTEON certified dealer.
Beautiful, High-Quality Construction
Unlike other switches, the SwitchLinc Dimmer offers the natural feel of high-end dimmers. You'll love the crisp, tactile response with each touch instead of the mushy feeling of other brands. The SwitchLinc Dimmer is designed and manufactured to high-end specifications and goes through over 10 quality control tests before arriving at your doorstep. This modern Decora-style switch will blend with any room's design. White paddles are included with each SwitchLinc Dimmer, but additional paddle colors are available and sold separately. Choose the color that best suits your room's decor: Ivory, Almond, Black, Brown, or Grey. Two paddles are included in each color-change set. Don't forget to order a matching wall plate. If you prefer, you can purchase your SwitchLinc with the color already changed: The INSTEON SwitchLinc Dimmer is available in Ivory, Almond, Black, Brown, and Grey.
Scene Lighting
Scenes allow you to control multiple lights, rooms or even the whole home with a single command. Because the SwitchLinc Dimmer can be a member of more than 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various lighting scenarios with a single button press. These are elegant features usually found only in systems costing tens of thousands of dollars and requiring extensive rewiring of your home. All member lights can ramp to your independently desired brightness levels at your chosen ramp rate(s). So one set of lights can dim slowly, while another set turns off instantly, all controlled with one command from one button. If you want to control multiple scenes from one controller, upgrade to the INSTEON KeypadLinc Dimmer. Looking for other ways to use the SwitchLinc Dimmer? Check out Smarthome's Learning Center.
X10 Compatible
The INSTEON SwitchLinc Dimmer is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that it can respond to X10 commands from an X10 controller and it can send X10 commands to X10 devices. Please note that INSTEON devices repeat INSTEON signals but not X10.
Non-Volatile Memory
All SwitchLinc Dimmer settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the SwitchLinc Dimmer will return to its last brightness level when power is restored.
Certifications and Warranty
All SwitchLinc products are safety approved. The factory for SmartLabs Design Products is ISO9001 certified. Because of this passion for quality, Smarthome stands behind the entire SwitchLinc line of products with a full 2-year warranty.
|
Specifications
|
Specifications | | General | | Brand: | Smarthome | | Manufacturer: | SmartLabs Design | | Manufacturer Product No.: | 2476D, INSTEON SwitchLinc Dimmer, White | | UPC: | 891114000082 | | Patent No.: | U.S. Patent No. 7,345,998, International patents pending | | Warranty: | 2 years, limited (Upgradeable to 7 years) | | Operation | | On-Levels: | 32 locally, increments of 1% with software | | Ramp Rates (full-ON to full-OFF): | 0.125 to 9 seconds if programmed locally, 0.125 seconds to 9 minutes if programmed remotely | | LED Indicator: | 9 White LEDs, Optional Green, Blue, Amber, or Red with #2400L kit | | Operation Modes: | INSTEON only, X10 only, INSTEON and X10 Combo Mode | | Combo Mode Message Order: | INSTEON, X10, INSTEON cleanup | | Multi-Way Circuit Support: | One SwitchLinc Dimmer controls load, Cross-Link any number of SwitchLinc Dimmers or other INSTEON Controllers | | Setup Memory: | Non-volatile EEPROM | | INSTEON Features | | INSTEON Addresses: | 1 hard-coded out of 16,777,216 possible | | INSTEON Links: | 417 out of 16,777,216 possible | | INSTEON Powerline Frequency: | 131.65 KHz | | INSTEON Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | INSTEON Minimum Receive Level: | 10 mV | | INSTEON Messages Repeated: | Yes | | Mechanical | | Paddle Type: | True rocker action | | Color: | White installed; Optional Ivory, Black, Brown, Almond, or Gray with #2400xx kits | | Wire Nuts: | 5 included | | Mounting: | Mounts in single or multiple-ganged junction box. Control 200 W less load for each immediately adjacent SwitchLinc Dimmer installed. For example, 600 W load control becomes 400 W with another dimmer to the immediate right or left. Use a triple-gang box with a mechanical switch in the center to avoid de-rating. | | Operating Conditions: | Indoors, 40 to 104°F, up to 85% relative humidity | | Dimensions: | 4.1" H x 1.8" W x 1.2" D | | Weight: | 3.6 oz | | Electrical | | Supply Voltage: | 120 Volts AC +/- 10%, 60 Hertz, single phase | | Surge Protection: | MOV rated for 150 Volts | | Neutral Wire: | Required | | Power Wire Leads: | 6", 16 AWG, stranded,600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white) | | Maximum Amps: | 5 amps | | Ground Lead: | 6", 18 AWG, stranded, bare copper | | Load Types: | Wired-in incandescent lighting devices | | Maximum Load: | 600 Watts (uses 12-Amp triac dimmer) | | Minimum Load: | No minimum load required |
| Certification: | Safety tested for use in USA and Canada (ETL #3017581) | | X10 Features | | X10 Primary Address: | 1 optional (comes unassigned) | | X10 Scene Addresses: | 255 possible | | X10 Status Response: | Supported | | X10 Resume Dim: | Supported (by setting Local On-Level to zero) | | X10 Powerline Frequency: | 120 KHz | | X10 Minimum Transmit Level: | 3.2 Vpp into 5 Ohms | | X10 Minimum Receive Level: | 20mV into 5 Ohms | | X10 Messages Repeated: | No |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|
|
|