|
|
| Leviton 15A Relay X10 Wall Switch w/AGC |
|
|
| Item# 2206WI |
|
|
|
|
|
Overview
|
- For high-wattage lighting (without dimming)
- Use for anything rated up to 15 amps!
- Control ceiling fans without hearing hum from the motor
Essential Info
For automated control of fluorescent lights, appliances or high wattage incandescent lighting, simply replace your existing wall switches with these easy-to-install, X10-compatible, 15 Amp Leviton Wall Switches. Unlike standard dimmer switches, which use triacs for switching, these Leviton wall switches use a mechanical relay to switch the load, so they have a much higher load capacity. For ceiling fans, since the electricity is not being modified by the triac in a dimmer, the electricity going to the fan motor is a pure sine-wave and won't cause the fan's motor to make an audible hum.
Manuals/Software
What's Included
15-Amp Leviton Wall Switch
Interchangeable white/ivory paddle switch cover
|
More Info
|
These Leviton Wall Switch Modules come with an interchangeable white/ivory paddle switch cover. Trim plate is not included. These Leviton Wall Switches require a neutral wire connection.
NOTE: Because this switch responds to the ALL LIGHTS ON command, care should be taken when used to switch non-lamp loads. If you don't want your appliance to respond to this command, use an X10 Appliance Module or an X10 Wall Receptacle.
The relay switching and 3-wire connection means the X10 receiver circuitry is somewhat isolated from the load and is relatively unaffected by the type of load being switched (provided it does not exceed rated capacity). Features of these 15 Amp Leviton Wall Switches include ALL LIGHTS ON and ALL UNITS OFF command response and a red LED light that indicates the switch is on.
Simple Push Button Operation
Unlike true-rocker action switches you'll only need to press the bottom portion of the paddle to control the load. Press the bottom of the paddle once to turn on the switch, press in the same place to turn it off again. For true-rocker action switches consider moving up to the SwitchLinc Relay.
What's that you say? The standard ivory switch paddles that come with these switches don't match your home's decor? No problem! Replace them with these interchangeable white or ivory switch paddles. Simply select the color that best fits your home's decor. Pop out the old paddle, then slip in the new paddle — it couldn't be faster or easier, and your home will look great!
Have your wall switch installed!
|
Specifications
|
Specifications | | Manufacturer: | Leviton | | Manufacturer Product No.: | 6291-WI | | Compatibility: | X10-compatible; can be used for anything rated up to 15 amps |
|
Images/Video
|
|
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|