|
|
| X10 Socketrocket Compact Screw-In Lamp Module |
|
|
| Item# 2005CM |
|
|
|
|
|
|
Overview
|
- Remotely turn ON/OFF any wired-in light
- Compact design fits into most light fixtures
Essential Info
Designed for spots where clearance is tight, this X10 SocketRocket compact screw-in lamp module is the ideal choice for use with table lamps, inside light fixtures and in places where you don't have enough space to use a standard X10 Screw-In Lamp Module.
Manuals/Software
What's Included
X10 Compact Screw-In Lamp Module - SocketRocket
|
More Info
|
Only 1 1/4 inches in diameter (it extends the bulb by about 1 1/4 inches) with a 3/8 inch bump on one side, this module will fit inside the cover of most wired-in light fixtures, such as ceiling lights with glass or plastic covers. And because it's small enough to fit under most lampshades, it's perfect for table lamps, too.
Need smaller bulbs for smaller lamps with less clearance? Try the Sylvania Elogic Bulbs that are 30% smaller but last 50% longer than standard bulbs.
Installation's a snap. Simply screw the lamp module into the socket and a light bulb into the module. Unlike conventional X-10 modules the X10 Compact Screw-In Lamp Module does not have any code wheels. To set the unit code, apply power to the light and within 30 seconds, send the X10 code for the module three times. On the third press, the lamp will turn on signifying that the code has been learned. The code will be remember even after a power failure. This device requires the source to be switched ON all the time.
And you're all set with remote on/off control from any X10 transmitter plugged into any AC outlet in your home, without running a single wire. The module even responds to the ALL LIGHTS ON and ALL UNITS OFF command. Does not respond to DIM commands. Rated for up to 150W incandescent lamps.
Order several and automate every wired-in light in your home in minutes!
|
Specifications
|
Specifications | | Manufacturer: | X10 Pro | | Manufacturer Product No.: | SocketRocket RLM20, LM15A or PSM04 | | Dimensions: | 1 1/4 inches in diameter (extends the bulb by about 1 1/4 inches) with a 3/8 inch bump on one side | | Compatibility: | Fits inside the cover of most wired-in light fixtures
Fits under most lampshades | | Rating: | Up to 150W incandescent lamps |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
|